| |
NOTES 1. Horsepower, torque, output
speed and overhung load capacities based on 1750 rpm
input speed and 1.00 Service Factor.
2. Non-standard ratios available. Consult Dorris
Company if desired ratio is not shown.
3. Overhung load is measured at the midpoint of the
key for the input and output shafts respectively.
|
4.
Measured at the input shaft. 5. If a backstop is
required consult Dorris Company for backstop torque
capacity as it is less than the output torque rating
shown.
6. Consult Dorris Company for thermal capacity in your
application.
|
|
