10,000 Series

(Download 10000 Series *.pdf file)

DOUBLE & TRIPLE REDUCTION BASE TYPE GEAR DRIVES

9910cat


Average Shipping Weight:  1500 Lbs.
Right click on link to download CAD drawing:  BASETYPE.dxf

NOTE:  Bracketed numbers in table below refer to Notes section below table.

MODEL RATIO (2) REDUCTION (3) RATINGS (1) GEARBOX (5) INERTIA (LB-FT2)
OUTPUT (RMP) INPUT HORSEPOWER OUTPUT TORQUE (IN-LB) INPUT SHAFT (4) OVERHUNG LOAD CAPACITY (LBS) OUTPUT SHAFT (4) OVERHUNG LOAD CAPACITY (LBS)
10015 14.956 DOUBLE 117.0 351.3 (6) 189,200 2,200 18,000 1.86
10025 25.357 DOUBLE 69.0 216.8 (6) 198,000 2,500 20,000 1.03
10040 38.474 DOUBLE 45.5 147.8 204,700 2,500 20,000 0.62
10060 59.384 TRIPLE 29.5 98.9 211,350 2,000 20,000 0.63
10080 81.776 TRIPLE 21.4 73.4 216,100 2,000 20,000 0.77
10100 100.681 TRIPLE 17.4 60.5 219,150 2,000 20,000 0.58
10125 122.412 TRIPLE 14.3 50.3 221,800 2,000 20,000 0.47
10150 152.766 TRIPLE 11.5 41.0 225,000 2,000 20,000 0.56
10175 178.264 TRIPLE 9.8 35.3 227,100 2,000 20,000 0.47
10200 202.346 TRIPLE 8.6 31.2 229,000 2,000 20,000 0.41

 

NOTES

  1. Horsepower, torque, output speed and overhung load capacities based on 1750 rpm input speed and 1.00 Service Factor.

  2. Non-standard ratios available.  Consult Dorris Company if desired ratio is not shown.

  3. Double reduction high speed shaft dimensions shown in parentheses ( ).

  4. Overhung load is measured at the midpoint of the key for the input and output shafts respectively.

  5. Measured at the input shaft.

  6. Consult Dorris Company for thermal capacity in your application.