1800 Series

(Download 1800 Series *.pdf file)

DOUBLE REDUCTION BASE TYPE GEAR DRIVES

1800cat


Average Shipping Weight:  75 Lbs.
Right click on link to download CAD drawing:  BASETYPE.dxf

NOTE:  Bracketed numbers in table below refer to Notes section below table.

MODEL RATIO (2) RATINGS (1) GEARBOX (4) INERTIA (LB-FT 2)
OUTPUT (RPM) INPUT HORSEPOWER OUT TORQUE (IN-LB) INPUT SHAFT (3) OVERHUNG LOAD CAPACITY (LBS) OUTPUT SHAFT (3) OVERHUNG LOAD CAPACITY (LBS)
1805 (5) 4.922 356 22.6 4000 100 1550 0.05
18058 (5) 5.764 304 19.3 4000 100 1550 0.04
1806 (5) 6.243 280 17.8 4000 100 1550 0.04
18065 (5) 6.482 270 17.2 4010 100 1550 0.04
18072 (5) 7.192 243 15.8 4080 100 1550 0.03
1808 (5) 7.590 231 14.8 4040 100 1550 0.03
18088 (5) 8.827 198 13.0 4140 100 1550 0.03
1809 9.315 188 12.2 4100 100 1550 0.02
18105 10.462 167 11.3 4240 250 1800 0.02
1811 11.040 159 10.5 4160 250 1800 0.02
18125 12.493 140 9.4 4210 250 1800 0.01
18133 13.340 131 8.8 4240 250 1800 0.01
1814 13.973 125 8.2 4130 250 1800 0.01
1815 14.920 117 7.7 4150 350 1800 0.01
1817 16.889 104 6.1 3720 350 1800 0.01
1819 19.11 92 5.4 3740 350 1800 0.01
1820 20.407 86 5.1 3780 350 1800 0.01

 

NOTES

  1. Horsepower, torque, output speed and overhung load capacities based on 1750 rpm input speed and 1.00 Service Factor.

  2. Non-standard ratios available.  Consult Dorris Company if desired ratio is not shown.

  3. Overhung load is measured at the midpoint of the key for the input and output shafts respectively.

  4. Measured at the input shaft.

  5. If a backstop is required consult Dorris Company for backstop torque capacity as it is less than the output torque rating shown.