9500 Series

(Download 9500 Series *.pdf file)

DOUBLE & TRIPLE REDUCTION BASE TYPE GEAR DRIVES

919395cat


Average Shipping Weight:  700 Lbs.
Right click on link to download CAD drawing:  BASETYPE.dxf

NOTE:  Bracketed numbers in table below refer to Notes section below table.

MODEL RATIO (2) REDUCTION (3) RATINGS (1) GEARBOX (5) INERTIA (LB-FT2)
OUTPUT (RPM) INPUT HORSEPOWER OUTPUT TORQUE (IN-LB) INPUT SHAFT (4) OVERHUNG LOAD CAPACITY (LBS) OUTPUT SHAFT (4) OVERHUNG LOAD CAPACITY (LBS)
9510 (6) 10.568 DOUBLE 166 289.0 (7) 110,000 1850 8,000 2.58
95262 (6) 26.198 TRIPLE 67 115.0 (7) 109,000 1850 8,000 0.40
9530 30.035 TRIPLE 58 98.1 106,100 1850 8,000 0.40
9532 32.100 TRIPLE 54 95.0 110,000 1850 8,000 0.35
9537 37.501 TRIPLE 47 83.7 113,000 1950 9,000 0.38
9540 40.238 TRIPLE 43 78.3 113,500 1950 9,000 0.37
9550 49.988 TRIPLE 35 63.3 114,000 2000 11,000 0.36
9559 58.787 TRIPLE 30 54.3 115,000 2000 11,000 0.35
9570 70.363 TRIPLE 25 45.6 115,500 2100 12,000 0.34
9580 80.351 TRIPLE 22 40.1 116,000 2100 12,000 0.32
95100 100.157 TRIPLE 17 32.4 117,000 2150 14,000 0.27

NOTES

  1. Horsepower, torque, output speed and overhung load capacities based on 1750 rpm input speed and 1.00 Service Factor.

  2. Non-standard ratios available.  Consult Dorris Company if desired ratio is not shown.

  3. Double reduction high speed shaft dimensions shown in parentheses ( ).

  4. Overhung load is measured at the midpoint of the key for the input and output shafts respectively.

  5. Measured at the input shaft.

  6. If a backstop is required consult Dorris Company for backstop torque capacity as it is less than the output torque rating shown.

  7. Consult Dorris Company for thermal capacity in your application.