608TR

608tr

 

 

*15, 25, 30 and 40:1 ratios are double reduction and use the 2 15/16 inch high speed shaft in alternate location shown above.

(Double Reduction dimensions in parentheses.)
Right click on link to download CAD drawing:  608TRCAD.dxf 

MODEL 415TR010 415TR015 415TR020 415TR025 415TR030 415TR035
ACTUAL RATIOS 14.647 25.147 31.706 36.761 58.897 80.145
SHIPPING WEIGHT (LBS) 2600 2600 2600 2600 2710 2710
MODEL 608TR100 608TR125 608TR150 608TR175 608TR200 608TR225
ACTUAL RATIOS 99.802 125.833 148.696 169.944 197.039 217.37
SHIPPING WEIGHT (LBS) 2710 2710 2710 2710 2710 2710

QUICK RELEASE TAPERED BUSHINGS:

bushing_type_1 The bushing kit contains a bushing, nut, key(s) and mounting screws.
The recommended driven shaft length is 20.25 inches and uses the recommended keyway length. 
When an application requires the minimum driven shaft length, the keyway must be keyed along the entire length.
This e-mail address is being protected from spambots. You need JavaScript enabled to view it for bore sizes not shown.

 

BUSHING KIT NO.* WEIGHT (LBS) TYPE DRIVEN SHAFT DIMENSIONS (INCHES)
DIA KEYWAY WIDTH X DEPTH RECOMMENDED KEYWAY LENGTH MINIMUM DRIVEN SHAFT LENGTH
608T608
78
1
6 1/2
1 1/2 X 3/4
14 1/2
16 1/8
608T607
82
1
6 7/16
1 1/2 X 3/4
14 1/2
16 1/8
608T600 103 1 6
1 1/2 X 3/4
15 1/2 17
608T515 106 1 5 15/16 1 1/2 X 3/4
15 1/2 17
608T507 128 1 5 7/16
1 1/4 X 5/8
15 1/2 17

NOTES, OPTIONS & ACCESSORIES

MOTOR MOUNTS (6MM and 6MM-1)
Right click on link to download CAD drawing: 6MM 6MM-1 

6mm6mm-1


V-BELT CENTER DISTANCES FOR MOUNTING POSITIONS SHOWN (INCHES)

MOTOR MOUNT POSITION

254T/256T

X=6 1/2

284T/286T

X=6 1/2

324T/326T

X=6 1/2

364T/365T

X=6 1/2

404T/405T

X=7 1/2

444T/445T

X=8 1/4

MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
A 24.34 28.76 25.05 29.48 26.00 30.45 26.96 31.42 27.92 32.38 28.88 33.36
B 32.63 37.14 33.36 37.87 34.33 38.85 35.30 39.83 36.28 40.81 37.26 41.79
C 30.87 34.47 31.44 35.07 32.20 35.89 32.98 36.71 33.77 37.54 34.57 38.39
D 37.75 41.71 38.39 42.37 39.23 43.24 40.09 44.13 40.95 45.01 41.82 45.91
E 23.13 27.69 23.87 28.43 24.85 29.42 25.84 30.41 26.82 31.40 27.81 32.39
F 51.21 55.82 51.96 56.57 52.95 57.56 53.95 58.56 54.95 59.56 55.94 60.55

SCOOP MOTOR MOUNT OPTION

Scoop Motor Mounts are available only for models 415, 507, 608 & 700, and permissible only in the 6 o'clock orientation.  See Scoop Mount page for diagram, notes and dimensions.

FACE  MOUNTING

Face mounting holes are not drilled on standard units -- Contact factory if face mounting is desired.

TORQUE ARM

The preferred position for the torque arm is 90° to a line between the point of attachment of the torque arm to the drive and the low speed shaft. The torque arm must be in tension. Keep the torque plate in the position shown.

EXTERNAL  BACKSTOP  KIT

Backstop extensions are standard on double reduction drives and can be supplied on single reduction drives if specified when order is placed. See Engineering Information section for backstop torque capacity.
Kit no. BS608TR -     60:1 thru 225:1 ratios
Kit no. BS608TR-1 -  30:1 and 40:1 ratios
Kit no. BS608TR-2 -  15:1 and 25:1 ratios